Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX6 UGII ENV DAT

Status
Not open for further replies.
sasha1

sasha1

Aerospace
Joined
Feb 5, 2008
Messages
54
Location
GB
Using NX6.

Can anyone please advise on the proceedure to allow users to save and access manufacturing tool data to/from a common tool library other that the standard defined in the UGII_ENV.dat file.
This to include exporting/importing tool data to/from library and the use of tool.prt models defined in the tool graphics directory.

any advise would be much appreciated

Currently using NX6
 
Status
Not open for further replies.

Similar threads

I
  • Question Question
Load interpart data
Replies
1
Views
4K
Toost
Toost
rookiezzz
  • Locked
  • Question Question
Monitor and access the data
Replies
1
Views
1K
cowski
cowski
NXsupport
  • Locked
  • Question Question
Placing views and how it is controlled via 3D or 2D datasets
Replies
4
Views
3K
Bleaker
Bleaker
NXsupport
  • Locked
  • Question Question
Is there a quick way to dynamically move a datum place across a body to measure minimum wall thickness
Replies
3
Views
5K
Toost
Toost
Ozcar
  • Locked
  • Question Question
conversion of material databse for StarCCM and AmeSim
Replies
0
Views
293
Ozcar
Ozcar

Part and Inventory Search

Sponsor

Back
Top