Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

conversion of material databse for StarCCM and AmeSim

Status
Not open for further replies.
Ozcar

Ozcar

Aerospace
Joined
Mar 17, 2023
Messages
7
Location
NL
Hi everyone,

does anyone here have a nice way of sharing the materials database from NX to StarCCM and AmeSim? NX uses the .xml format while the other two use .mdb and .csv respectively. We are fiddling around with simple online converters, but a more robust process would be nice.

Any ideas / suggestions?

Thanks!
 
Status
Not open for further replies.

Similar threads

SBlackBeard
  • Locked
  • Question Question
NX Journal for PMI and Location
Replies
2
Views
2K
cowski
cowski
scout67
  • Locked
  • Question Question
Conversion Status Window
Replies
2
Views
379
scout67
scout67
MANox
  • Locked
  • Question Question
Number of holes in Hole and thread callout
Replies
0
Views
1K
MANox
MANox
Kenja824
  • Question Question
NX2406 - Flatten and Forming Tool Not Projecting all the points
Replies
1
Views
6K
Carbonated
Carbonated
moog3
  • Locked
  • Question Question
Journal to assign material, and a body colour
Replies
16
Views
2K
moog3
moog3

Part and Inventory Search

Sponsor

Back
Top