Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nozzle Lables

Status
Not open for further replies.
mdare35

mdare35

Mechanical
Joined
Jan 16, 2009
Messages
1
Location
US
Is there anyway to get the 3D shot on the cover sheet to have bigger labels for the nozzles? I'm thinking the balloons you typically see on assembly drawings would be nice.
 
Sort by date Sort by votes
COMPRESS does not provide options to change the nozzle markings. However, you can use any graphic file for the Cover Page (or you can omit the graphic image). Thus users can use a photograph, drawing, etc, as the image on the Cover Page.

"Although this forum is monitored by Codeware it is not intended as a venue for technical support and should not be used as the primary means of technical support."

Tom Barsh
Codeware Technical Support
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JD P.E.
  • Locked
  • Question Question
Tangential Nozzle on Conical Transition
Replies
3
Views
872
Cobra17
Cobra17
Amr Shams
  • Locked
  • Question Question
NOZZLE WELDED TO BLIND FLANGE
Replies
0
Views
776
Amr Shams
Amr Shams
JEB1812
  • Locked
  • Question Question
Adding nozzle to bolted cover on App 2 flange
Replies
0
Views
683
JEB1812
JEB1812
mechengineer
  • Locked
  • Question Question
use MAWP to check nozzle load & wind/earthquake loads
Replies
0
Views
191
mechengineer
mechengineer
Mech2325
  • Locked
  • Question Question
WRC 107 nozzle calculations
Replies
0
Views
280
Mech2325
Mech2325

Part and Inventory Search

Sponsor

Back
Top