Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nickel and Nickel cobalt alloy tube (ASME SB -622 or SB-626) vs copper tube

Status
Not open for further replies.
ed2009

ed2009

Nuclear
Joined
Jan 5, 2009
Messages
6
Location
CA
Could anybody tell the difference if the Nickel and Nickel cobalt alloy tubes (ASME SB-622 or SB626) are used on the hydrogen cooler instead of copper tube? The fluid in the shell side is hydrogen while the tube side is lake water. Thanks.
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

milosd
  • Locked
  • Question Question
ASME SB-564 Maximum section thickness for N06625
Replies
1
Views
2K
EdStainless
EdStainless
H
  • Locked
  • Question Question
Welding Position GTAW orbital welding tube-to-tubesheet
Replies
2
Views
3K
XL83NL
XL83NL
M
  • Locked
  • Solved
Tube-to-tubesheet PQR/WPS Qualification (mock-up test)
Replies
3
Views
2K
fleischfresser
fleischfresser
engineer0
  • Question Question
ASME B31.8 vs 49 CFR 192 Subpart D - Design of Pipeline Components
Replies
1
Views
8K
A.egis
A.egis
Khalid Hameed
  • Locked
  • Question Question
ASME B 31.3 and ASME B31.8
Replies
4
Views
2K
Khalid Hameed
Khalid Hameed

Part and Inventory Search

Sponsor

Back
Top