Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SE2607 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need Some Help On Converting Pro/e Files

Status
Not open for further replies.

730

Computer
Jan 15, 2002
3
Was wondering if i could get some help on converting

Pro/e or Pro/engineer Files

To one or all of the following

Flash
Swift 3d
Lightwave
3d Studio MAX

Any Help Would Be Great
 
Replies continue below

Recommended for you

As far as a file converter, I don't know of a standalone or web-based solution for the platforms you mention. I have been closely tied to this issue for over a year now, and found that file converters only exist for the higher-end CAD packages (ProE, CATIA, UG, I-DEAS). For others, the only feasible solution is neutral files (IGES or STEP), but unfortunately you are left with a 'dumb solid' which cannot be modified.

Recneps
 
If you can use a flash file, can you use the VRML format? It is veiwable through the Internet explorer and the user can spin pan zoom. The VRML publisher is built right into Pro Engineer.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor