Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need recommendation regarding material for stone yard

Status
Not open for further replies.
civil75000

civil75000

Civil/Environmental
Joined
Jun 29, 2008
Messages
1
Location
US
A stone yard needs to be “sprayed” or “tacked” down so the #304 remains in place. Anyone knows of a product what to use beside "tar & chip"?

Thanks

civil75000
 
Sort by date Sort by votes
You could try mag-chloride, it's used around here for dust control.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

TJ_Not So Civil Engineer
  • Locked
  • Question Question
Reclaimed Concrete Base Material
Replies
4
Views
935
TJ_Not So Civil Engineer
TJ_Not So Civil Engineer
P
  • Question Question
Ground Screws for Light Structures – Load Performance?
Replies
0
Views
847
peter651
P
Blackfairy
  • Locked
  • Question Question
Pavement Design Question and What to look for Boring logs (California)
Replies
0
Views
2K
Blackfairy
Blackfairy
E
  • Locked
  • Question Question
BEST CIVIL3D WORKFLOWS FOR SURFACE CREATION AND CUT&FILL ANALYSIS?
Replies
2
Views
1K
Emil's Dad
E
Phatt
  • Locked
  • Question Question
allowable settlement for substation equipment
Replies
4
Views
1K
EireChch
EireChch

Part and Inventory Search

Sponsor

Back
Top