Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need Info: In Mold Label Adhesion Testing

Status
Not open for further replies.
cjmann10185

cjmann10185

Mechanical
Joined
Aug 26, 2014
Messages
1
Location
US
Hello-
I am looking to see if anyone is able to share any information regarding their test methods for in mold label adhesion on injection molded parts. We use a standard cross hatch peel test for pad print, heat transfer, etc but the IML is a different animal since it is a [in this specific application] multi layer PET label.

Thanks in advance.

Chris

 
Status
Not open for further replies.

Similar threads

Buckshott00
  • Locked
  • Question Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
948
Buckshott00
Buckshott00
clyde Verse
  • Locked
  • Question Question
Any way to produce a 100% same plastic lampshell without injection mold?
Replies
5
Views
1K
Pud
Pud
cityjack
  • Locked
  • Question Question
Mold program to 3D model. How?
Replies
0
Views
235
cityjack
cityjack
Splint
  • Locked
  • Question Question
Rotomolding materials suppliers in Australia - small quantities
Replies
0
Views
794
Splint
Splint
Tegguy
  • Locked
  • Question Question
Creep in 3D printed Nylon
Replies
12
Views
2K
Tegguy
Tegguy

Part and Inventory Search

Sponsor

Back
Top