Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NDE to determine pile layout of a building?

Status
Not open for further replies.

Bagman2524

Structural
Joined
Jul 14, 2005
Messages
707
Location
US
Is there any type of NDE or other method for determining the pile layout/depth for a slab on grade building?
 
Bagman2524,

You could use Ground-Penetrating Radar or electromagnetic sensing to determine the layout of steel in the slab. This should help indicate where the piles are.

You can then sawcut around selected piles to conduct pulse echo tests to evaluate the length and/or shape of the deep elements. Alternatively, you could perform small-diameter corings or borings to evaluate the pile characteristcs.

Jeff
 
thanks. I feared as much. I was hoping it wouldn't be so complex and that an ultrasound of the ground could figure it out.
 
Bagman2524,

As I understand it, the pile needs to be decoupled from the slab to perform ultrasound testing. Otherwise the wave propagates through the slab and not the pile due to mass and density of the slab being similar to the pile.

Jeff
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top