Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Monel 400- 316L GMAW recommendations?

Status
Not open for further replies.

jlcochran1

Mechanical
Oct 30, 2003
94
Welding a replacement section of a pressure vessel. Monel 400 to 316L SS. Looking for any GMAW wire recommendations.
1/4" Monel to 3/8" 316L SS.
 
Replies continue below

Recommended for you

Suggest you contact the technical folks at Special Metals, but I think you could use (1)82 or Inco A.
 
Sorry you did say GMAW, ERNiCr-3 ( 82) should work.
 
There are a number of nickel base weld filler metals that can be used. You need to determine the corosion compatabilty of the materials before selecting the appropriate one.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor