Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Modeling 4
- Thread starter CAD2015
- Start date
rstupplebeen
Mechanical
Hopefully this will help in cross-referencing. This is the Catia thread for the same topic.
In there I have referenced 2 blog posts showing how to go from point cloud to NURBS geometry with Catia
[URL unfurl="true"]http://optimaldevice.com/blog/femur-ct-scan-to-finite-element-analysis/[/url]
[URL unfurl="true"]http://optimaldevice.com/blog/dental-x-ray-to-bite-simulation/[/url]
I hope this helps.
Rob Stupplebeen
OptimalDevice.com
My LinkedIn
In there I have referenced 2 blog posts showing how to go from point cloud to NURBS geometry with Catia
[URL unfurl="true"]http://optimaldevice.com/blog/femur-ct-scan-to-finite-element-analysis/[/url]
[URL unfurl="true"]http://optimaldevice.com/blog/dental-x-ray-to-bite-simulation/[/url]
I hope this helps.
Rob Stupplebeen
OptimalDevice.com
My LinkedIn
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question