Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

modal analysis of a thin plate

Status
Not open for further replies.
yhb

yhb

Specifier/Regulator
Mar 9, 2004
3
The results of the eigen frequency of a thin plate are different between two meshing methods,including "hex sweep" and "tre free". which meshing method is more accurate?
 
Status
Not open for further replies.

Similar threads

Anurag K
  • Question
Hydrostatic bearing CFD analysis
Replies
1
Views
120
karachun
karachun
R
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
672
Rabea-19
R
O
  • Question
Simulation of a screw connexion
Replies
1
Views
3K
dgeesaman
dgeesaman
H
  • Locked
  • Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
andradesilva
  • Locked
  • Question
modal analysis in ANSYS Mechanical APDL 2020 R2: How to see graphical results without mesh/elements
Replies
1
Views
734
NRP99
NRP99

Part and Inventory Search

Sponsor

Back
Top Bottom