Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Material Property for NL 610-10777-375 2

Status
Not open for further replies.

Kakalip

New member
Joined
Jun 18, 2009
Messages
26
Location
US
Hello ,
I was checking whether you guys have material properties for Nordam panels NL 610-10777-375 & NL 610-11233-375

Let me know guys if any one of you have allowables and source of same.

Please advice.

Kakalip
 
Nordam should provide the data to you.

Wes C.
------------------------------
No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced.
 
I asked them but particular said that it was not with them at moment.
 
Nordam should be able to provide you with something! at the very least the;
Long Beam Flexure, “L” Direction Skin Stress, psi
and Climbing Drum Peel in-lb/3-inch width

I have got some specs out of them for 610-10233-500 and similar but not the numbers you quoted, they are pretty slow at getting info to you in my experience.

If you were supplied with the actual panels I would be jumping up and down a bit more :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top