Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

M stands for machining

Status
Not open for further replies.
CREERAAM

CREERAAM

Mechanical
Joined
Feb 23, 2015
Messages
109
Location
IN

Hai,

I was reviewed an MTC of Puddle flanges ASTM A36 in the MTC "Processing method was 'M' Mentioned and Delivery condition Mentioned as 'M'. M stands for machining? Delivery condition M stands for what?




REGARDS,

G.SRIRAM.

Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
 
Status
Not open for further replies.

Similar threads

R
  • Question Question
Minimum required thickness for PAUT for process piping
Replies
2
Views
4K
Andrew ONeill
Andrew ONeill
A
  • Question Question
simulated PWHT cycles for deaerator
Replies
3
Views
4K
DekDee
DekDee
C
  • Question Question
Nondestructive Testing for Creep Detection
Replies
4
Views
3K
EdStainless
EdStainless
DMRAO
  • Locked
  • Question Question
MDMT for ss 316L pipe
Replies
2
Views
1K
0707
0707
Jupshaw
  • Locked
  • Question Question
Request for Manual Inspection Procedures for Tube Bending Assembly with X, Y, and Z Origin Bends&quo
Replies
1
Views
446
r6155
r6155

Part and Inventory Search

Sponsor

Back
Top