Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

LS Dyna time step problem?

Status
Not open for further replies.
DDM84

DDM84

Automotive
Oct 13, 2011
16
Hello friends,

I am trying to understand how to determine Termination time(ENDTIM) in LS Dyna and (DT2MS) time step size for mass scale solution.

Thanks in advance.
 
Status
Not open for further replies.

Similar threads

raslraslov
  • Locked
  • Question
nCode Designlife Materials and LS-Dyna d3plot (ANSYS)
Replies
0
Views
450
raslraslov
raslraslov
GregLocock
  • Locked
  • Question
Z88 Aurora - model problem
Replies
3
Views
3K
GregLocock
GregLocock
DJL Eng
  • Locked
  • Question
Stiffness Matrix/ Solving for Displacements Problem 3
Replies
17
Views
1K
rb1957
rb1957
1415user
  • Locked
  • Question
How to get true deformations after static analysis based on the results of an explicit LS DYNA analy
Replies
1
Views
280
IceBreakerSours
IceBreakerSours
jhp1981
  • Locked
  • Question
LS Dyna Gissmo? Triaxiality?
Replies
0
Views
165
jhp1981
jhp1981

Part and Inventory Search

Sponsor

Back
Top Bottom