Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

LS Dyna time step problem?

Status
Not open for further replies.
DDM84

DDM84

Automotive
Joined
Oct 13, 2011
Messages
16
Location
GB
Hello friends,

I am trying to understand how to determine Termination time(ENDTIM) in LS Dyna and (DT2MS) time step size for mass scale solution.

Thanks in advance.
 
Status
Not open for further replies.

Similar threads

raslraslov
  • Locked
  • Question Question
nCode Designlife Materials and LS-Dyna d3plot (ANSYS)
Replies
0
Views
611
raslraslov
raslraslov
GregLocock
  • Locked
  • Question Question
Z88 Aurora - model problem
Replies
3
Views
4K
GregLocock
GregLocock
A
  • Question Question
Problem fusing cone with curved geometry in Salomé-Méca (GEOM module)
Replies
0
Views
6K
Aliénor
A
DJL Eng
  • Locked
  • Question Question
Stiffness Matrix/ Solving for Displacements Problem
Replies
17
Views
2K
rb1957
rb1957
1415user
  • Locked
  • Question Question
How to get true deformations after static analysis based on the results of an explicit LS DYNA analy
Replies
1
Views
435
IceBreakerSours
IceBreakerSours

Part and Inventory Search

Sponsor

Back
Top