Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

LS Dyna Gissmo? Triaxiality?

Status
Not open for further replies.
jhp1981

jhp1981

Mechanical
Joined
Dec 17, 2021
Messages
29
Location
US
I have triaxiality models for my materials. How do I use it in LS Dyna to show failure and damage parameter?
 
Status
Not open for further replies.

Similar threads

raslraslov
  • Locked
  • Question Question
nCode Designlife Materials and LS-Dyna d3plot (ANSYS)
Replies
0
Views
577
raslraslov
raslraslov
1415user
  • Locked
  • Question Question
How to get true deformations after static analysis based on the results of an explicit LS DYNA analy
Replies
1
Views
418
IceBreakerSours
IceBreakerSours
Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
jhp1981
  • Locked
  • Question Question
LS Dyna Impact Analysis....object not rebounding after impact
2 3
Replies
52
Views
2K
IceBreakerSours
IceBreakerSours
Zande10
  • Locked
  • Question Question
Linear Static vs Linear Dynamic FEA for a moving mass having deceleration
Replies
5
Views
657
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top