Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

looking for a mechanical part design review / checking checklist in excel

Status
Not open for further replies.

sja33

Mechanical
Jun 11, 2012
2
if anyone has an excel checklist for drawing checking, that would be most helpful!

thanks in advance
 
Replies continue below

Recommended for you

In your title you mention 'design review' as well, or do you only care about drawing checking.

Based on what I've seen here, I'd be very hesitant to condone or encourage 'engineering by checklist' but perhaps that's just me.

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
sja33,

What has Excel got to do with design and drawing quality?

--
JHG
 
the checking process was going to use excel as a template document to define generic items that need to be checked routinely. Was looking for any templates people have used in the past. thx
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor