Jun 11, 2012 #1 sja33 Mechanical Jun 11, 2012 2 if anyone has an excel checklist for drawing checking, that would be most helpful! thanks in advance
Jun 11, 2012 #3 KENAT Mechanical Jun 12, 2006 18,387 In your title you mention 'design review' as well, or do you only care about drawing checking. Based on what I've seen here, I'd be very hesitant to condone or encourage 'engineering by checklist' but perhaps that's just me. Posting guidelines faq731-376 http://eng-tips.com/market.cfm? (probably not aimed specifically at you) What is Engineering anyway: faq1088-1484 Upvote 0 Downvote
In your title you mention 'design review' as well, or do you only care about drawing checking. Based on what I've seen here, I'd be very hesitant to condone or encourage 'engineering by checklist' but perhaps that's just me. Posting guidelines faq731-376 http://eng-tips.com/market.cfm? (probably not aimed specifically at you) What is Engineering anyway: faq1088-1484
Jun 12, 2012 #4 drawoh Mechanical Oct 1, 2002 8,960 sja33, What has Excel got to do with design and drawing quality? -- JHG Upvote 0 Downvote
Jun 12, 2012 Thread starter #5 sja33 Mechanical Jun 11, 2012 2 the checking process was going to use excel as a template document to define generic items that need to be checked routinely. Was looking for any templates people have used in the past. thx Upvote 0 Downvote
the checking process was going to use excel as a template document to define generic items that need to be checked routinely. Was looking for any templates people have used in the past. thx
