Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Logitech Revolution MX and Pro/E

  • Thread starter Thread starter khkh
  • Start date Start date
Status
Not open for further replies.
K

khkh

Guest
Hi

I'm using a Logitech Revolution MX in Pro/E Wildfire 3.0 but i dont like to use the scroll whell button to rotate etc. With my previous Logitech mouses (MX510, 710 and 1000) I had no problem assigning one of the thumb button to "middle button". But in the setpoint driver for the MXRevolutionI only have the option for "middle button" on the scroll whell button
smiley19.gif



Does anyone have a solution on how to assign the thumb "back button" to middle button with a Logitech MX Revolution?





Regards
kh
 
Status
Not open for further replies.

Similar threads

pmbov
  • Locked
  • Question Question
Creo 10 Pro/program Problems
Replies
7
Views
2K
3DDave
3DDave
Designer_D
  • Locked
  • Helpful tip Helpful tip
Original Pro/Engineer Blue Background Color Values (thread554-165973)
Replies
0
Views
2K
Designer_D
Designer_D
freerangequark
  • Locked
  • Question Question
Wireframe and Hidden Display Style - Tangent Line Display
Replies
3
Views
1K
3DDave
3DDave
CAD2015
  • Locked
  • Question Question
PTC Creo electrical workbenches.........................
Replies
0
Views
889
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
Which are the main Electrical Design modules?
Replies
2
Views
2K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top