Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Load transfer from 3D to axisymmetric model with LDREAD - APDL

Status
Not open for further replies.
CDE123

CDE123

Mechanical
Joined
Mar 9, 2015
Messages
7
Location
AT
Hello!

Does anyone know if it's possible to establish a load transfer from a 3D model to an axisymmetric model using the LDREAD command?

Best regards and thank you!
 
Status
Not open for further replies.

Similar threads

rcbsimoes
  • Locked
  • Question Question
ansys apdl, etab, max per row
Replies
1
Views
799
rcbsimoes
rcbsimoes
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
rcbsimoes
  • Locked
  • Question Question
Shared Faces in Ansys APDL
Replies
0
Views
565
rcbsimoes
rcbsimoes
H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun

Part and Inventory Search

Sponsor

Back
Top