Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Laser Turbo Blower Overhauling
- Thread starter lightl
- Start date
LASERNINJA
Mechanical
In my opinion, it's not just changing out the turbo that's important, is cleaning the tubes, changing the orings, and replacing the mirrors.
It's taking care of the laser to ensure that it runs consistently day in and day out.
I have at least 30 machines that I take care of with over 50,000 hours. Very rarely do I have "break downs" or unscheduled service calls. It's just a matter of doing all the service when it's recommended.
Yes, I do make money on service, Yes, I do make money changing out turbos. And, Yes, I have a lot of very old machines that still make tons of money.
It's taking care of the laser to ensure that it runs consistently day in and day out.
I have at least 30 machines that I take care of with over 50,000 hours. Very rarely do I have "break downs" or unscheduled service calls. It's just a matter of doing all the service when it's recommended.
Yes, I do make money on service, Yes, I do make money changing out turbos. And, Yes, I have a lot of very old machines that still make tons of money.
- Status
Similar threads
