Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Laser Design

Status
Not open for further replies.
Shahram56

Shahram56

Materials
Joined
Feb 6, 2003
Messages
21
Location
CA
I am trying to desing some hetrostructur laser with InGaAs on InP substrate. I am novice and tryng to find the lattice donstant and doping and thickness of the layers however with in these recent days I was not very successful. Is there anyodu who have done this before and designing the solid state laser and can refer me to some references. I just can find how to find the dopings and thicknesses.

Thanks
 
Status
Not open for further replies.

Similar threads

B
  • Question Question
how to laser cut a cylinder
Replies
0
Views
5K
Bluces
B
D
  • Question Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
M
  • Locked
  • Question Question
AMADA LC1212 ALPHA iii LASER MACHINE /HELP!
Replies
3
Views
3K
Well Oiled Machine
Well Oiled Machine
S
  • Locked
  • Question Question
LD1 Alarm Amada 6kW Fiber Laser
Replies
0
Views
1K
SiemensN00b
S
B
  • Question Question
Will there be problems with the cutting section if the laser cutting speed is too fast or too slow?
Replies
3
Views
451
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top