Kinematic analysis of suspension linkage

[David_Yu]

I got a problem in finding the result of velocity vs distance in my case study. In my case, the vehicle is travelling at constant velocity of 15m/s and go through a bump profile of z = a*sin(2*pi*x/L).

How should I going to define my input motion in ADAMS?
I really need helps. Thanks in advance

 

[GregLocock]

Look at 2d_poly.rdf and see if you can figure out the syntax. It isn't hard. Or, use the road profile builder in Car.


Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?