Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Kerosine burners in fire tests

Status
Not open for further replies.
Mikethelark

Mikethelark

Aerospace
Joined
Apr 13, 2005
Messages
1
Location
GB
Can anyone provide info on manufacturers for liquid fuel (kerosine)burners (more usually used to heat water boilers) complete with nozzle as per ISO 2685?

The objective is to produce a 'Standard Flame'at 1100C, c/w the normal 1500C produced by the standard unit.

And then there is the flame profile etc!!

Any suggestions appreciated
 
Status
Not open for further replies.

Similar threads

C
  • Question Question
stresses in framed structures
2 3
Replies
51
Views
6K
GregLocock
GregLocock
HA649
  • Question Question
Solid elements rotations in FEA
Replies
11
Views
2K
ThomasH
ThomasH
M
  • Locked
  • Question Question
Picture Frame Installation in Cabin
Replies
5
Views
7K
MintJulep
M
EdwardNigma
  • Locked
  • Question Question
Modeling Spring Elements (CBUSH, CELAS) in Patran
Replies
0
Views
3K
EdwardNigma
EdwardNigma
A
  • Question Question
Cutout in lower wing skin: How can I hand calc this?
Replies
6
Views
19K
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top