Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is it possible to input non linear stress strain data for orhtotropic

Status
Not open for further replies.
oceanwhale

oceanwhale

Marine/Ocean
Joined
Nov 1, 2006
Messages
1
Location
US
Hello,

Is there a way to input stress-strain data for a orthotropic material? In both X and Y directions, the material is Bilinear elastic.
Someone posted a similar question in 2004 and I am still looking for a solution. Any help ?

Thank you for any assistance.
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
5K
TOM1345
T
Faraz1997
  • Locked
  • Question Question
How to reduce number of iterations in tabular data of transient thermal analysis
Replies
3
Views
1K
NRP99
NRP99
LS_SMS
  • Locked
  • Question Question
Zero Through-Thickness Bending Stress
Replies
9
Views
1K
TGS4
TGS4

Part and Inventory Search

Sponsor

Back
Top