Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

INT function in PLC5

Status
Not open for further replies.

moosetracks555

Electrical
Joined
Jun 26, 2008
Messages
40
Location
US

I have a number like 25632 that I want to move into 2 integers so 25 is in one, and 632 is in the other. This seems like a simple task, and I am probably overcomplicating it. Any suggestions?
 
I guess I should have posted what I am using now.
I take the 25632 * 0.001 and store it in X
Then I take X * 1000 and Store it in Y
If Y > X then I subtract 1 from X and that is my 25
Then I take my 25 from the last line * 1000 and put that in Z. Then I take the original 25632 - Z and that is my 632.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top