Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Induction heating Vs Resistance Heating

Status
Not open for further replies.
tekari123

tekari123

Mechanical
Joined
Aug 7, 2013
Messages
29
Location
IN
Dear All,

In which case the ''Induction Heating'' of piping components are mandatory over ''Resistance Heating''?? Is there any code reference or bindings..?


Thanks in advance,
Alok
 
Sort by date Sort by votes
None that I can think of in US codes and standards. This is a process detail, or decided by the owner/user of engineering firm.
 
Upvote 0 Downvote
None in ASME Code. Is a decision of User or Client.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

moiz19670309
  • Question Question
Safety Class Vs Construction Class
Replies
2
Views
4K
moiz19670309
moiz19670309
teokal
  • Locked
  • Question Question
Reinfocing Pad vs Transition plate
Replies
0
Views
844
teokal
teokal
engineer0
  • Question Question
ASME B31.8 vs 49 CFR 192 Subpart D - Design of Pipeline Components
Replies
1
Views
8K
A.egis
A.egis
M
  • Locked
  • Question Question
ASME 16.5 2020 vs 2013 wrong pipe OD
Replies
0
Views
828
minodi
M
ipi
  • Locked
  • Question Question
SAW Flux Neutrality Wall number Vs Basicity index!!!
Replies
0
Views
2K
ipi
ipi

Part and Inventory Search

Sponsor

Back
Top