Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Identify a fitting

Status
Not open for further replies.
Marke525

Marke525

Mechanical
Joined
Apr 20, 2006
Messages
12
Location
US
I am trying to identify a fitting. It is on a filter housing and looks like a hygienic (tri-clamp) fitting, but the dimensions don't match anything. Any suggestions?
 
Sort by date Sort by votes
What is the service of the vessel and materials of construction? That might narrow the field somewhat.
 
Upvote 0 Downvote
It is a filter housing made of 316L used in a fermentation process
 
Upvote 0 Downvote
I've checked:

Hygienic (tri-clover)
DIN
SMS
DS

None of these match
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

torsani
  • Locked
  • Question Question
Table UW-16.1 manufacture's fitting thickness
Replies
2
Views
2K
IdanPV
IdanPV
mariolucas75
  • Locked
  • Question Question
Help to identify nozzle to shell joint details
Replies
5
Views
790
jt1234
jt1234
E
  • Question Question
Pressure and thermal stressors in a tube
Replies
7
Views
8K
SnTMan
SnTMan
M
  • Question Question
R Stamping a non-U Stamped Pressure Vessel
Replies
2
Views
4K
jt1234
jt1234
A8yssUK
  • Locked
  • Question Question
High pressure "vessel" inside a vacuum chamber.
Replies
6
Views
2K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top