Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Identify a fitting

Status
Not open for further replies.
Marke525

Marke525

Mechanical
Apr 20, 2006
12
I am trying to identify a fitting. It is on a filter housing and looks like a hygienic (tri-clamp) fitting, but the dimensions don't match anything. Any suggestions?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
What is the service of the vessel and materials of construction? That might narrow the field somewhat.
 
Upvote 0 Downvote
It is a filter housing made of 316L used in a fermentation process
 
Upvote 0 Downvote
I've checked:

Hygienic (tri-clover)
DIN
SMS
DS

None of these match
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

torsani
  • Locked
  • Question
Table UW-16.1 manufacture's fitting thickness
Replies
2
Views
1K
IdanPV
IdanPV
mariolucas75
  • Locked
  • Question
Help to identify nozzle to shell joint details 1
Replies
5
Views
566
jt1234
jt1234
M
  • Question
R Stamping a non-U Stamped Pressure Vessel
Replies
2
Views
4K
jt1234
jt1234
A8yssUK
  • Question
High pressure "vessel" inside a vacuum chamber.
Replies
6
Views
2K
EdStainless
EdStainless
LC-24
  • Question
UG-36(c)(3)(-a)(-1)/(-2) "Small Opening" Exemption
Replies
2
Views
1K
LC-24
LC-24

Part and Inventory Search

Sponsor

Back
Top Bottom