Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I need a shop curtain. 1

Status
Not open for further replies.

BusaJames

Mechanical
Jun 15, 2007
30
Hi all. I'm setting up a shop area inside of a large storage room. I need to put up curtains to keep metal, wood, and plastic chips from getting all over the other stuff that's stored up there. It would probably be good if it were heat resistant. I went to Home Depot and all I found were paint drop cloths. I can get up to 6mil. I was hoping for something differenct. Any ideas?

Thanks,
Busa James
 
Replies continue below

Recommended for you

Try Googling for Welding curtains and screens...

There's plenty of industrial curtains available.
 
check out industrial supply catalog houses like McMaster-Carr, others. Plenty available.


TygerDawg
Blue Technik LLC
Advanced Robotics & Automation Engineering
 
Blue tarps melt pretty easy. Don't ask me how I know. The McMaster-Carr site helped a lot. Now I just need to decide how fancy my curtains need to be.
 
Went to McMaster-Carr and my boss had them shipped overnight. They're gonna be perfect. Plus he ordered up some other stuff I was looking for.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor