Hypershot & Pro|Engineer WildFire v.5

[HyDrageN]

<span title="

 

[design-engine]

yes. Your someone installed the bunkspeed plug-in for Wildfire 5.0

Its awesome. Ive been using it all month.
Edited by: design-engine

 

[zpaolo]

design-engine is right, besides, Hypershot no longer exists as far as I know

 

[design-engine]

I think they call it shot now. It's a part of Bunkspeed

 

[[-Skint-]]

Shot is not part of bunkspeed, its owned by Luxion. Bunkspeed have kept the "Hyper" tag and have Hypershot or Hypermove.


Keyshot is much better !

OP... if your using hypershot you can still get thier pro-e plug-in. If your using keyshot tho, you will have to go into your directory or control panel and manually get rid of all the hypershot files that are left behind. They conflict with each other. Im using Vista x64 by the way if that means owt

 

[pjw]

Luxion Keyshot.

 

[zpaolo]

]
Shot is not part of bunkspeed, its owned by Luxion. Bunkspeed have kept the "Hyper" tag and have Hypershot or Hypermove.

This is not accurate. Shot is a product of Bunkspeed, as was Hypershot. Shot is not "owned" by Luxion and Hypershot "as a product" was not "owned" by luxion too, just the technology behind it. Luxion developed the technology behind Hypershot (but not the technology behind Shot, which is from Mental Images), then broke up with Bunkspeed and decided to develop Keyshot (which is an evolution of Hypershot) on its own.

Paolo

 

[Muelli]

Hi guys,

I am using Wildfire4 and tried to install the hypershot plugin. I change the protk.dat manually but still it's not working.Pro/e says at startup:

Pro/Toolkit registry file C:\Program Files\proeWildfire 4.0\text\protk.dat:
application 'hyper shot' failed to start; see trailfile for details.

Any help will be very much appreciated.