Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to view results for all substeps in a nonlinear analysis on ANSYS mechanical 1

Status
Not open for further replies.

lopessilva

Mechanical
Joined
Nov 26, 2011
Messages
49
Location
PT
Hello,

I am doing a non-linear structural analysis on ANSYS. Solution is found after 10 substeps. I have only one load step. The problem is that I need to list results for all substeps and I can only access results from the LAST substep. When I change substep, it says: "load set not found on results file file.rst". What do I need to do in order to view results for all substeps?

thanks and regards,
Hugo
 
Before you solve issue outres,all,all. This will save all substeps on the results file. By default only the last substep is saved.


------------
See faq569-1083 for details on how to make best use of Eng-Tips.com
 
Thanks a lot. It works perfectly!!!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top