Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to set input parameters to 200 on static analysis in workbench 18.1 for optimization purposes?

Status
Not open for further replies.
andradesilva

andradesilva

Materials
Joined
Jun 20, 2017
Messages
125
Location
PT
Hi,

I want to set input parameters (name and value) for optimization purposes on the static module of ANSYS Workbench 18.1.

The problem is that I can only set input parameters ARG1-ARG9. I would like to set 200 parameters. How can I import parameters from text file, or at least how can I set the number of parameters to 200?

Best regards,
AndradeSilva
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
789
Rabea-19
R
Sparky4598
  • Locked
  • Question Question
Static structural structural error plot
Replies
0
Views
2K
Sparky4598
Sparky4598

Part and Inventory Search

Sponsor

Back
Top