Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to model a Boot(sump) in B-JAC(aspen)

Status
Not open for further replies.
jehan17718

jehan17718

Mechanical
Jul 8, 2005
79
I am using aspen B-jac at this time and i need to model a heat exchanger TEMA type BKU along with a sump. can any one tell me how to model the sump in the heat exchanger on shell side.
 
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question
Getting properties of Lube oil in Aspen EDR
Replies
1
Views
1K
shvet
shvet
Robati2024
  • Locked
  • Question
How to calculate isentropic tempera 1
Replies
4
Views
477
PaoloPemi
PaoloPemi
J
  • Question
Confined Flame in a Cylindrical Furnace for Glass Melting
Replies
2
Views
4K
EdStainless
EdStainless
A
  • Locked
  • Question
Enthalpy related dillema in a steam piston engine
Replies
5
Views
4K
AndreiM
A
MechEng92
  • Locked
  • Question
How should I work out Wattage for a heat exchanger pad heater?
Replies
9
Views
1K
pierreick
pierreick

Part and Inventory Search

Sponsor

Back
Top Bottom