Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to draw path in APDL

Status
Not open for further replies.
pashapatil67

pashapatil67

Mechanical
Joined
Oct 6, 2015
Messages
3
Location
IN
hii.
i m doing linear analysis of elbow in ANSYS APDL..and i have chosen shell 281 element...i want to plot hoop stress vs angle between two node(nodes in curve portion of elbow)..i have tried to select path on curve portion of elbow but couldn't able to map that path with stress....can anyone help me out from this...

than you
prashant patil
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
rcbsimoes
  • Locked
  • Question Question
Shared Faces in Ansys APDL
Replies
0
Views
567
rcbsimoes
rcbsimoes
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
rcbsimoes
  • Locked
  • Question Question
ansys apdl, etab, max per row
Replies
1
Views
812
rcbsimoes
rcbsimoes

Part and Inventory Search

Sponsor

Back
Top