Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to determine the average stress of a bar in Ansys?

Status
Not open for further replies.
FANFEIFEI

FANFEIFEI

Mechanical
Nov 8, 2005
6
If the straight bar has large deformation and becomes bent, how to determine the average stress of the bar.
And how to determine the total reaction force of this bar with one end fixed.
Thank you!
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Hmmmm. Reaction force, just issue the PRRSOL command. Average stresses? Bit vague that is.


------------
See faq569-1083 for details on how to make best use of Eng-Tips.com
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

X
  • Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
960
xinyu3liu
X
M
  • Locked
  • Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
689
MihailW
M
H
  • Locked
  • Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
677
Rabea-19
R

Part and Inventory Search

Sponsor

Back
Top Bottom