Hello anyone.
I need to create screw with beam element B31, where DOF 123456 are fixed.
*ELEMENT, TYPE=B31 (Beam)
Fix connection, DOF 123456 linked
KINEMATIK-BEAM-KINEMATIK
Consider diameter of screw head in modelling
Simple Output of cutting force:
SF1: axial
SF2 und SF3: shear force.
Can anyone help me.
I uploaded inp file, where I used MPC coupling. But I did not use preload force.
I need to create screw with beam element B31, where DOF 123456 are fixed.
*ELEMENT, TYPE=B31 (Beam)
Fix connection, DOF 123456 linked
KINEMATIK-BEAM-KINEMATIK
Consider diameter of screw head in modelling
Simple Output of cutting force:
SF1: axial
SF2 und SF3: shear force.
Can anyone help me.
I uploaded inp file, where I used MPC coupling. But I did not use preload force.