Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to calculate the coordinate angle of two points in the post processor?

Status
Not open for further replies.
Jay Yu

Jay Yu

Industrial
Joined
Oct 4, 2022
Messages
3
Location
TW
For example the following example

X2.924 Y-737.155 A0.568236364 <===ATAN(ABS((X5.475-X2.924)/(Y-737.081-Y-737.155))
X5.475 Y-737.081

How to write the formula in the post processor?
 
Status
Not open for further replies.

Similar threads

Kenja824
  • Question Question
NX2406 - Flatten and Forming Tool Not Projecting all the points
Replies
1
Views
6K
Carbonated
Carbonated
Jian Wang
  • Locked
  • Question Question
Export points coordinate from NX to txt
Replies
4
Views
2K
Jian Wang
Jian Wang
W
  • Locked
  • Question Question
how to get graphics window coordinate?
Replies
0
Views
1K
wang.wei
W
CAD2015
  • Locked
  • Question Question
Get to the part location from the tree...................
Replies
5
Views
5K
NXGeek
N
nxprog
  • Question Question
Reuse assemblies in the Reuse Library
Replies
1
Views
3K
GigaManf
G

Part and Inventory Search

Sponsor

Back
Top