Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HOW IS SEAL CLASSIFIED

Status
Not open for further replies.
Joined
Oct 25, 2011
Messages
52
Location
IN
Metal Parts
Rotating Face
Gaskets
Stationary face
Capture_deyqcc.png


Any other material not covered. Please include



A well phrased question has answers in itself!!!
 
A well phrased question has answers in itself!!!
 
The normal material combinations of a mechanical seal should be:
1. Rotary face
2. Stationary face
3. Spring/Bellow material
4. Elastomers
5. Metal parts

The springs/bellows should be separated normally because in many situations srings/bellows may need using different and special materials such as different alloys.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top