Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I get rid of this warning?
- Thread starter ML24
- Start date
If in TC, you can only check it our if you have permission to do so and no one else has it checked it.
If the file is on a local or network drive, close the file and change the file permissions, then reopen the file.
You could also do a Save As to a new name.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
If the file is on a local or network drive, close the file and change the file permissions, then reopen the file.
You could also do a Save As to a new name.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
JohnRBaker
Mechanical
I can't comment on what you'd do when using Teamcenter, but if you're running Native, this message is controlled by a setting in Customer Defaults. To change this and other settings which you might see while working with Read-Only part files, go to...
Customer Defaults -> Assemblies -> General -> Miscellaneous
...and you'll find what you're looking for there.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
Customer Defaults -> Assemblies -> General -> Miscellaneous
...and you'll find what you're looking for there.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #5
doc1955
Aerospace
- Mar 14, 2008
- 68
![[rofl]](/data/assets/smilies/rofl.gif "[rofl] [rofl]")
The size and location of your engineering/manufacturing team plays a part into the decision to implement a package like Teamcenter.
If you have 5-10 engineers all in one area and they comunicate well, there may not be a compelling need.
If you have 5-10 engineers spread out globally, then the need to share data becomes more critical and you need to have something to tell others what each one is working on.
On the other hand, 35-50 engineers and mabufacturing people in one building may be enough to justify the expense and 'painful' experience of implementing Teamcenter or any other PLM system.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
If you have 5-10 engineers all in one area and they comunicate well, there may not be a compelling need.
If you have 5-10 engineers spread out globally, then the need to share data becomes more critical and you need to have something to tell others what each one is working on.
On the other hand, 35-50 engineers and mabufacturing people in one building may be enough to justify the expense and 'painful' experience of implementing Teamcenter or any other PLM system.
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
- Status
Similar threads