Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How can I measure the lenght of a spline?
- Thread starter Matrix
- Start date
1. Use the command 'list', it will give you length along with coordinates of vertces, etc.
2. Use 'area', it gives you length as well as area.
3. Use 'lengthen', it gives you cuttent length, then 'esc' to cancel.
If programming, use 'area', then the length is stored in the System Variable 'perimeter'.
Regards,
Carl
2. Use 'area', it gives you length as well as area.
3. Use 'lengthen', it gives you cuttent length, then 'esc' to cancel.
If programming, use 'area', then the length is stored in the System Variable 'perimeter'.
Regards,
Carl
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question