Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How are dart features dimensioned/detailed?
- Thread starter ACarrier
- Start date
CheckerHater
Mechanical
If this could be of any help...
"For every expert there is an equal and opposite expert"
Arthur C. Clarke Profiles of the future
"For every expert there is an equal and opposite expert"
Arthur C. Clarke Profiles of the future
MikeHalloran
Mechanical
Does CATIA call those features "darts"? I associate the word with something else.
Mike Halloran
Pembroke Pines, FL, USA
Mike Halloran
Pembroke Pines, FL, USA
Depends on the tolerance allowed. More tolerance means more options.
Since darts are formed from the outside corner, dimension from that surface to avoid adding sheet thickness variance. Depth measured from outside virtual corner or tangent to bend. Add a cross-section view to dimension dart section (radius, etc.).
Since darts are formed from the outside corner, dimension from that surface to avoid adding sheet thickness variance. Depth measured from outside virtual corner or tangent to bend. Add a cross-section view to dimension dart section (radius, etc.).
- Status
Similar threads
- Question
- Question
- Locked
- Question
- Locked
- Solved