Hose for Lime slurry

[extremechanical]

Please guide me what material and type of hose is suitable for Lime slurry application with 90 Deg C temp and with 160 PSI pressure. My specification further says 3:1 refers RMA standards

Please help!

 

[micalbrch]

Depending upon the hose size and length I would not see any problem in using a standard rubber hydraulic hose with steel reinforcement. They are cheap for small sizes and you will get them everywhere. And their pressure rating exceeds your requirement by far.

 

[extremechanical]

Hi Micalbrch, Thanks for the headsup...

Do you suggest me any specific references so I can keep a basis for my selection ..thanks in advance!

 

[micalbrch]

Not really a reference if you mean a standard. But check

http://www.parker.com.

I think you get some good help from there. And they have offices worldwide.