Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Valve selection for phosphoric acid

Status
Not open for further replies.
C

chok7

Mechanical
Joined
Dec 10, 2024
Messages
3
G'day,
Trying to find further details around valving for an 85% phosphoric acid system at max 50 deg C temperature.
Would standard 4" bayonet valves be suitable for this service? Being cast from ASTM A 216 Grade WCB.
Or should phosphoric acid be limited to stainless steel valving.

Thanks
 
Status
Not open for further replies.

Similar threads

ShabsRBI
  • Locked
  • Question Question
Plug and Seat Material for Boiler Feed Water Control Valve
Replies
4
Views
3K
ShabsRBI
ShabsRBI
sry110
  • Locked
  • Question Question
Material Selection for Increased Cavitation Erosion Resistance
Replies
5
Views
885
EdStainless
EdStainless
Radius1
  • Locked
  • Question Question
Looking for specification for identifying pearlite in cast iron sample.
Replies
0
Views
2K
Radius1
Radius1
BSMEclassof2012
  • Question Question
Brine concentration for pumps made from ductile cast
Replies
1
Views
1K
EdStainless
EdStainless
S
  • Locked
  • Question Question
Software for Material Engineers
Replies
4
Views
3K
Saman2002
S

Part and Inventory Search

Sponsor

Back
Top