Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

hole wizard leader/text gap?

Status
Not open for further replies.
mathey

mathey

Mechanical
Joined
Mar 9, 2004
Messages
19
Location
US
Is there any way to change the gap between the end of a leader and the leader text when using hole wizard callouts? The gap is unusually large.
 
Sort by date Sort by votes
news update...

the actual text of the note read as such:

<NUM_INST>X <MOD-DIAM> <hw-diam> <hw-thru> <dim>

What is the <dim> for at the end? Removing it solves the problem, but why is it there? The calloutformat.txt file appears to be correct...
 
Upvote 0 Downvote
update 3...the <DIM> appears to be a placeholder for a tolerance...the gap only appears when the leader tail is to the right of the text...so its holding a space for the tolerance, even tho there is no tolerance in this situation...

SW 2005 0.1

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Helepolis
  • Locked
  • Question Question
Hole Wizard - UNC STI Tapped Hole?
Replies
3
Views
2K
ctopher
ctopher
borsht
  • Question Question
Hole Wizard is moving sketch outside of feature in tree
Replies
14
Views
7K
Gupta65
Gupta65
33MRM33
  • Locked
  • Question Question
SW Macro to list hole wizard features and measures the diamter of modeled hole
Replies
4
Views
2K
Gupta65
Gupta65
JerryWong
  • Locked
  • Question Question
Hole callout in mirror part
Replies
4
Views
1K
SBaugh
SBaugh
franhd
  • Locked
  • Question Question
Leader alignment to feature control frame
Replies
3
Views
628
SBaugh
SBaugh

Part and Inventory Search

Sponsor

Back
Top