Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
High Temperature HMI 1
- Thread starter apatjr
- Start date
-
1
- #2
Ask and ye shall recieve...
"Venditori de oleum-vipera non vigere excordis populi"
"Venditori de oleum-vipera non vigere excordis populi"
You can try any industrial grade PC for the purpose, I think. Industrial grade monitors can take 60 deg. C, and a lot of other adverse conditions (like vibration, dust, high humidity, etc.)
Look in the market for "Industrial Grade PC".
I know one manufacturer - ADVANTECH - you may find their address from the Internet.
Look in the market for "Industrial Grade PC".
I know one manufacturer - ADVANTECH - you may find their address from the Internet.
Hi bmsg,
Class 1 Div 2 is a hazardous atmosphere environment - applying 'any' industrial PC would be reckless and dangerous, not to mention unlawful. Equipment has to be specially designed and approved for these applications: it tends to be expensive and either use energy-limited design features to ensure that it can't deliver enough energy under normal or fault conditions to cause ignition, or to be massively constructed so if an ignition does occur internally, it is dissipated harmlessly without causing ignition outside ofthe enclosure. The former is known as Intrinsically Safe equipment; the latter is flameproof (explosion-proof in the US). There are other methods, but it is a specialist field.
jraef's example is an example of I.S. equipment.
----------------------------------
If we learn from our mistakes,
I'm getting a great education!
Class 1 Div 2 is a hazardous atmosphere environment - applying 'any' industrial PC would be reckless and dangerous, not to mention unlawful. Equipment has to be specially designed and approved for these applications: it tends to be expensive and either use energy-limited design features to ensure that it can't deliver enough energy under normal or fault conditions to cause ignition, or to be massively constructed so if an ignition does occur internally, it is dissipated harmlessly without causing ignition outside ofthe enclosure. The former is known as Intrinsically Safe equipment; the latter is flameproof (explosion-proof in the US). There are other methods, but it is a specialist field.
jraef's example is an example of I.S. equipment.
----------------------------------
If we learn from our mistakes,
I'm getting a great education!
- Status
Similar threads
- Locked
- Question
- Locked
- Question