dwyejj
Industrial
- May 3, 2004
- 2
I have an application with the following clear coat requirements on ceramic/glass:
Minimum 50 micron thick clear coat that can withstand 230 degC.
The clear coat is to serve as a medium for application of decorative decal over aluminium/ceramic/glass substrate by a sublimation process.
Any suggestions for materials that can be applied via a wet or powder paint process?
Sincerely,
John
Minimum 50 micron thick clear coat that can withstand 230 degC.
The clear coat is to serve as a medium for application of decorative decal over aluminium/ceramic/glass substrate by a sublimation process.
Any suggestions for materials that can be applied via a wet or powder paint process?
Sincerely,
John