Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Acid corrosion by CO2 coating 1

Status
Not open for further replies.

Joss10

Mechanical
Dec 27, 2012
108
Dear mates,
I am looking for information/reccomendation on the best product to coat a stainless steel/carbon steel interface zone inside an amine tower working @ 100°C to prevent acid corrosion by CO2.
Any input will be grateful.
 
Replies continue below

Recommended for you

The old partial cladding problem comes back to bite someone else.


Both are approved by Saudi Aramco for amine service.

Are you sure you have 100 deg C in the contactor ?

Steve Jones
Corrosion Management Consultant


All answers are personal opinions only and are in no way connected with any employer.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor