Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi everyone. I have a question.

Status
Not open for further replies.
Replies continue below

Recommended for you

a)Check if there is some blockage in the pressure equalisation - balance line between discharge and suction
b)Check that seal gas supply is operating on dPIC or on flow control to each side preferably; pressure control may cause different flows to DE and NDE sides.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor