Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help required for modelling sandwich beam in Mechanical APDL !

Status
Not open for further replies.
vibration24

vibration24

Aerospace
Joined
Nov 21, 2011
Messages
2
Location
CA
I am trying to generate the sandwich composite beam with three distinct layers in Mechanical APDL (Ansys). Please suggest me how to define section or a layer in Preprocessor for 3 different layers in my geometry. For all the layers, the material I am using is elastic with linear and isotropic properties.
Thank you !!
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
3K
struclearner
struclearner
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
rcbsimoes
  • Locked
  • Question Question
Shared Faces in Ansys APDL
Replies
0
Views
571
rcbsimoes
rcbsimoes
M
  • Question Question
spaceclaim to STEP format, Help needed.
Replies
2
Views
20K
mosenansi
M

Part and Inventory Search

Sponsor

Back
Top